Lenovo J SERIES 3000 - Manual (Page 93)

Notes:
a. Your microprocessor and socket might look different than the one illustrated.
b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of
the microprocessor. This is important when reinstalling the microprocessor on the new system board.
c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
8. Make sure that the microprocessor retainer is fully open.
9. Holding the microprocessor with your fingers, remove the protective cover 2 that protects the gold
contacts on the new microprocessor 1 .
10. Holding the microprocessor with your fingers, position the microprocessor so that the triangle 1 is
aligned with the corresponding triangle on the socket.
11. Lower the microprocessor straight down into the socket.
Chapter 8 . Replacing FRUs (Types 7387, 7388, 7389, 7393, 7394, and 7395) 87