Lexmark 1200 - Manual (Page 124)

110 Chapter 7: Solving printer problems
Colored lines, streaks, or
smudges appear on the printed
page, or print appears blurred or
unclear. Replace the photoconductors. If the problem only occurs when printing black,
you can replace just the black photoconductor and fuser coating roll. If the
problem occurs when printing one of the colors, replace all three of the color
photoconductors. See page 94 for more information.
Toner specks appear on the page. Replace the fuser coating roll. If it is not time to order a black photoconductor kit,
which includes a fuser coating roll, order a separate fuser coating roll
(P/N 12A1706). See page 95 for more information.
Toner colors the background of
the page. Make sure the affected print unit is completely installed in the printer.
The page has 100% coverage of
one color. Make sure the system board is completely inserted in the printer and the thumb-
screws are securely tightened. Refer to the
Setup Guide for installation
instructions.
Make sure the affected print unit is completely installed in the printer.
Replace the photoconductors. If the page is black, you can replace just the black
photoconductor. If the page is another color, replace all three of the color photo-
conductors. See page 94 for more information.
Print quality problems (continued)
Problem Action