Lexmark 1200 - Manual (Page 70)

56 Chapter 2: Changing printer settings
Fax Parity Even
Odd
None*
Ignore
This setting lets you select the parity for the input and output data frames. Refer to the
Technical Reference for more information about parity.
Fax Buffer Disabled
Auto*
3K to maximum size allowed
You can configure the size of the fax input buffer to meet the requirements of your system. If
the limited size of the input buffer is preventing you from continuing work in your application
each time you receive a fax, you may want to increase the buffer size.
The maximum size depends on the amount of memory in your printer, the size of the other link
buffers, and whether the Resource Save setting is On or Off. To maximize the range for the
Fax Buffer size, you can disable or reduce the size of the parallel, serial, network, infrared, or
LocalTalk buffer. Choose the Auto setting to let the printer automatically calculate a buffer size
proportional to the total amount of available printer memory. In most cases, Auto is the recom-
mended setting.
See page 67 for a listing of the default buffer sizes for all the interface ports.
Note: Changing the Fax Buffer setting automatically resets the printer.
Fax Menu (continued)
Menu item Values
*Factory default