Lexmark 1200 - Manual (Page 99)

85 Using the multipurpose feeder
Feeding media
manually
You can also use the multipurpose feeder to feed single
sheets of paper, transparencies, card stock, labels, or indi-
vidual envelopes.
To print a page manually:
1
Select Manual Paper or Manual Envelope as the paper
source from the operator panel or from MarkVi-
sion:
a Press Menu> or <Menu to enter the menus.
Paper Menu appears on the second line of the dis-
play.
b Press Select to open the Paper Menu.
The Paper Source menu item appears on the sec-
ond line of the display.
c Press Select to select Paper Source.
d Press and release Menu> until Manual Paper or
Manual Env appears on the second line of the
display.
e Press Select to set the paper source.
f Press Go to return the printer to the ready state.
2
Select the paper size.
Since the multipurpose feeder does not automati-
cally sense the size of the media you load, you must
select the correct paper size for each job.
You can set the paper size from your software appli-
cation or driver, or follow the instructions below to
set the paper size from the operator panel or from
MarkVision:
a Press Menu> or <Menu to enter the menus.
Paper Menu appears on the second line of the dis-
play.
b Press Select to open the Paper Menu.