Lexmark 1200 - Manual (Page 68)

54 Chapter 2: Changing printer settings
NPA Hosts 1…10 (2*)
Use this setting to specify the maximum number of NPA hosts that can register for NPA printer
alerts. When the number of hosts registered for NPA alerts exceeds the quantity specified by
the NPA Hosts menu item, any additional hosts attempting to register for alerts are ignored.
Note: Changing the NPA Hosts setting automatically resets the printer.
LocalTalk Name Lexmark (Default Name)
This setting identifies the printer model name stored in printer memory. It cannot be modified
from the printer operator panel.
LocalTalk Addr 0.0.0 (LocalTalk Node Number)
The LocalTalk Address identifies the LocalTalk Node number assigned to the printer. It cannot
be modified from the printer operator panel.
LocalTalk Zone *
(Zone name provided by LocalTalk network)
This setting identifies the LocalTalk Zone. The setting * indicates that no particular zone is
specified, and therefore all zones are valid. This setting cannot be modified from the printer
operator panel.
LocalTalk Menu (continued)
Menu item Values
*Factory default