Lexmark 1200 - Manual (Page 31)

17 Menus
Paper Size
(continued) Manual Pap Size
A4* (Country specific)
A5
JIS B4
JIS B5
Letter* (Country specific)
Legal
A3
11x17
Universal
Manual Env Size
7 3/4 Envelope
9 Envelope
10 Envelope* (Country specific)
DL Envelope* (Country specific)
C5 Envelope
B5 Envelope
Other Envelope
The Paper Size setting identifies the default formatting size for each paper source. See
page 73 for a list of the dimensions for each paper and envelope size.
Trays 1, 2, and 3 have size sensing. The printer automatically determines the size of the paper
installed in the tray and displays
only that size as the default in the Paper Size menu. You
cannot change the default paper size for these trays from the operator panel. To set the paper
size, adjust the rear paper guide to the appropriate position in the tray. See page 72 for a
listing of the paper sizes the trays support.
The printer can only recognize A3 and B4 size paper or 11x17 and legal size paper. You must
decide which of the pairs of paper sizes you want your trays to support. (You can still load the
paper sizes you don’t select in the multipurpose feeder.) Select the appropriate setting from
the Size Detection menu item. See page 21 for more information.
For paper and envelope sources without size sensing (manual feed and the multipurpose
feeder), it is important to select the correct paper size from the menu. The MP Feeder Size
menu item is displayed only if the Configure MP menu item is set to Cassette.
Select Universal from the Paper Size menu when you load media in the multipurpose feeder
that doesn’t match any of the standard sizes. The printer formats the page for 11.7 x 17 in.
(297 x 432 mm). You can then set the margins for the actual page size from your software
application.
Paper Menu (continued)
Menu item Values
*Factory default