Lexmark 1200 - Manual (Page 42)

28 Chapter 2: Changing printer settings
Job Menu The Job Menu is available when the printer is idle, when
the printer is busy processing or printing a job, when a
printer message is displayed, or when the printer is in Hex
Trace mode. Press
Menu> or <Menu to open the Job Menu.
Job Menu
Menu item Values
Cancel Job If the printer is processing a job, press Menu> or <Menu to open the Job Menu, and then
press Select to cancel the job.
Reset Printer Press Select to reset the printer.
The printer resets to the user default setting for each menu item. All downloaded resources
(fonts, macros, symbol sets) in printer memory (RAM) are deleted. All data on the currently
selected host interface is deleted from the interface link buffer.
Note: Before selecting Reset Printer, exit the software application you are using.
Print Buffer Press Select to print any data stored in the print buffer.
This menu item is only available when you enter the Job Menu while the Waiting message is
displayed. The Waiting state occurs if an incomplete job is sent to the printer or if an ASCII job
is being printed. Examples include sending a print screen command from your host computer
or copying a DOS file.