Lexmark 1200 - Manual (Page 48)

34 Chapter 2: Changing printer settings
Job Accounting Off*
On
If you have an optional disk installed in your printer, set Job Accounting On to use the disk to
store statistical information about your printer’s most recent jobs. The statistics include
whether the job printed with or without errors, the time required to print the job, the size (in
bytes) of the job, the requested paper size and paper type, the color settings used, the total
number of printed pages, and the number of copies requested.
To print a listing of all the accumulated statistics, select Print from the Job Acct Stat menu item
in the Tests Menu.
The Job Accounting menu item is not displayed if the installed disk option is defective or
Read/Write or Write protected, or if the Job Buffer Size menu item is set to 100%.
Job Acct Limit Disabled
10…1000*
If you have an optional disk installed in your printer, you can use the disk to store statistical
information about a specified number of jobs. The value you select from the Job Acct Limit
menu item determines the number of jobs for which statistics are stored. Once you reach the
job limit, statistics for the oldest job are deleted as new statistics are stored, maintaining
statistics for the specified number of jobs.
If you select Disabled, the only limit to the number of jobs for which statistics are stored is the
memory available on the disk.
Warning: When you change the Job Acct Limit value, all statistical information stored on the
disk is discarded.
The Job Acct Limit menu item is not displayed if the installed disk option is defective or Read/
Write or Write protected, or if the Job Buffer Size menu item is set to 100%.
Setup Menu (continued)
Menu item Values
*Factory default