Lexmark 1200 - Manual (Page 49)

35 Menus
PCL Emul Menu Use the PCL Emul Menu to change printer settings that
only affect jobs printed using the PCL emulation printer
language.For information about the PCL emulation com-
mands supported by your printer, refer to the printer Tech-
nical Reference.
PCL Emul Menu
Menu item Values
Font Source Resident*
Download
Flash
Disk
All
The Font Source setting determines which fonts appear in the Font Name menu. If a font
source is not installed or does not contain any fonts, it is not listed as a value.
Font Name Font position and font name for all fonts in the selected font source
(R0 Courier 10*)
Always select the font source before you select a font name. After you select a font source,
choose the specific font from the Font Name menu item. The printer displays the font source
abbreviation, font ID, and font name for each font. The font source abbreviation is R for
resident, F for flash, K for disk, and D for download.
To print a font sample list showing all the fonts available for PCL emulation, select Print Fonts
and then PCL Fonts from the Tests Menu.
Point Size 1…1008 (in increments of 0.25)
(12*)
If you chose a scalable typographic font, you can select the point size for the font. Point size
refers to the height of the characters in the font. One point equals approximately 1/72 of an
inch. You can select point sizes from 1 to 1008 in increments of 0.25 points.
Pitch 0.08…100 (in increments of 0.01)
(10*)
If you chose a scalable monospaced font, you can select the font pitch. Pitch refers to the
number of fixed-space characters in a horizontal inch of type. You can select a pitch from 0.08
to 100 characters per inch (cpi) in increments of 0.01 cpi. For non-scalable monospaced fonts,
the pitch is displayed, but it cannot be changed.
*Factory default