Chapter 5. removing and replacing a part (fru) – LG LW60 User Manual

Page 39

Advertising
background image

38

Ch5. Removing and replacing a part

Chapter 5. Removing and replacing a part (FRU)

Danger

Before removing any FRU, power off the computer, unplug all power cords from electrical

outlets, remove the battery pack, and then disconnect any interconnecting cables.

Caution

Before the computer is powered on after FRU replacement, make sure that all screws, springs,

and other small parts are in place and are not loose inside the computer. Verify metal flakes can

cause electrical short circuits.

Note

As for the screw, every Torque 3 0.2Kgfcm(0.196Nm)

Advertising
This manual is related to the following products: