LG LW60 User Manual

Page 6

background image


Ch1. Service information


Electrical safety

Observe the following rules when working on electrical equipment.


Use only approved tools and test equipment. Some hand tools have handles covered with a soft

material that does not insulate you when working with live electrical currents.

Many customers have, near their equipment, rubber floor mats that contain small conductive

fibers to decrease electrostatic discharges. Do not use this type of mat to protect yourself from

electrical shock.

· Find the room emergency power-off switch, disconnecting switch, or electrical outlet. If an electrical outlet.

If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly.

· Do not work alone under hazardous conditions or near equipment that has hazardous voltages.

· Disconnect all power before

1. Performing a mechanical inspection

2. Working near power supplies

3. Removing or installing main units

· Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer

to power-off the wall box that supplies power to the machine and to lock the wall box in the off position.

· If you need to work on a machine that has exposed electrical circuits, observe the following precautions :

Ensure that another person, familiar with the power-off controls, is near you.


Another person must be there to switch off the power, if necessary.

· Use only one hand when working with powered-on electrical equipment. Keep the other hand in your

pocket or behind your back


An electrical shock can occur only when there is a complete circuit. By observing the above rule,

you may prevent a current from through your body.

· When using testers, set the controls correctly and use the approved probe leads and accessories for that


This manual is related to the following products: