Configuration options via command line (cont.) – LG CodePlus MUX/MOD Feature Card HCS6320 User Manual

Page 40

Advertising
background image

40

206-4183

View Hardware Information for the Selected Transcoder
At the

[HCS7720 (#)] Command >

prompt, type

hwid and press Enter to view the selected

card’s hardware ID (firmware version), for example:

Card HWID# is: 7720-v1.1-2011-1026

View Software Information for the Selected Transcoder
At the

[HCS7720 (#)] Command >

prompt, type

ver and press Enter to view the selected

card’s software versions, for example:

OS version:

HCS7720-943-2011-1025

Encoder version:

1.2

Application version: 2.5

View MUX Bitrate Data for the Selected Transcoder
At the

[HCS7720 (#)] Command >

prompt, type

bits and press Enter.

MUX bitrate data for the selected transcoder card is displayed in millions of bits per second

(Mbit/s), for example:

HDMI Input Bitrate 6.684 Mbit/s (raw 6.684 Mbit/s)

Ethernet Input Bitrate: 3.826 Mbit/s (raw 3.838 Mbit/s)

Data Output Bitrate: 4.127 Mbit/s

Total Output Bitrate: 19.390 Mbit/s

Refer to the Installation & Setup Guide for HCS7720 transcoder cards for further information on

bitrate data.

Install a Pro:Idiom Key on the Selected Transcoder

This command installs the Pro:Idiom encryption key on the selected transcoder card. To

install a Pro:Idiom key on all the transcoders, see “Install a Pro:Idiom Key on All

Transcoders” on page 33.

Caution: Do NOT initiate simultaneous menu sessions while a Pro:Idiom key

installation is in progress. Doing so will interfere with the active processes and

may corrupt the system configuration and/or cause the HCS6320 card to cease

normal operation.
Note: In order for a Pro:Idiom encrypted channel to be displayed, the receiver

must contain a Pro:Idiom decrypter, and the receiver must be configured to allow

decryption of the desired channel.

Configuration Options via Command Line (Cont.)

(Continued on next page)

Advertising