Pantech Matrix Pro - Manual (Page 162)

160 Chapter 12. PC connectivity, Internet Sharing, Remote desktop, Bluetooth and ActiveSync
Before changing synchronization settings on the phone, disconnect it
from your PC.
1
In the phone home screen, press Start > All Programs >
ActiveSync > [O].
2
Press Menu > Configure Server > [O]. If you have not yet set up
sync with Exchange Server, this will say Add Server Source.
3
In Server address, enter the name of the server running Exchange
Server, and press Next.
4
Enter your user name, password, and domain name, and press
Next.
5
If you want the phone to save your password so that you will not
need to enter it again when connecting, select Save password
check box and press [O].
6
Select the check boxes for the types of information items that you
want to synchronize with Exchange Server.
7
To change available synchronization settings, select the type of
information, and press Menu > Settings > [O].
8
To change the rules for resolving synchronization conflicts, press
Menu > Advanced > [O].
9
Press Finish.
CHANGE ACTIVESYNC SETTINGS
Once you set up synchronization using the Sync Setup wizard on the
PC, you can later change your synchronization settings:
•
If you want to change ActiveSync settings for synchronizing
with a PC, use ActiveSync on the PC. For more information, see
"Changing the amount of information synchronized" in ActiveSync
Help on the PC.
•
If you want to change ActiveSync settings for synchronizing with
Exchange Server, use ActiveSync on your phone, as described in
"Change settings for an information type."
See also
Install and set up ActiveSync
Connect the phone
Change settings for an information type
ACTIVESYNC