Pantech Matrix Pro - Manual (Page 204)

202 Chapter 14. Settings
•
User name: Enter your network user name, if required.
•
Password: Enter your password, if required.
•
Domain: Enter the domain name, if required.
4
Press Done.
CREATE A GPRS CONNECTION
Every network connection is different. You should gather all of the
relevant information or network settings you need before starting this
process.
1
On the home screen, press Start > All Programs > More >
Settings > Connections.
2
Press GPRS.
3
Press Menu > Add. Enter the following information:
•
Description: Enter a name for the connection.
•
Connects to: Select the type of network to which you will
connect.
•
Access point: Enter the access point name.
•
User name: Enter your user name for the GPRS network, if
required.
•
Password: Enter your password, if required.
•
Authentication Type: Enter the Authentication Type, if required.
•
Primary DNS: Enter the primary Domain Name System (DNS)
address, if required.
•
Secondary DNS: Enter the secondary DNS address, if required.
•
IP address: Enter the Internet Protocol (IP) address for the
device, if required.
4
Press Done.
The device uses this connection when you open a program that
connects to the Internet.
CONNECTIONS