Pantech Matrix Pro - Manual (Page 26)

24 Chapter 1. Before using your phone
The battery is not charged when the phone is first purchased – fully
charge the battery before first use. The battery will charge faster if the
phone is powered off while charging. Battery operating time gradually
decreases over time. If the battery fails to perform normally, you may
need to replace it.
BATTERY INSTALLATION
Be sure to use only the batteries that have been provided with the
phone. Installation is easier if you have placed the phone on a flat
surface.
1
Place the battery on the back of the
handset and slide into place.
2
Push the battery down until it locks
into place.
BATTERY REMOVAL
Again, place the battery on a flat surface and use an even, steady
pressure when removing the battery.
1
Pull the release latch upwards, lift up the
battery.
2
Remove the battery from the handset.
`
NOTE
If the battery is not correctly placed in the compartment, the handset will not
turn on and/or the battery may detach during use.
BATTERY USAGE


2

1