Pantech Matrix Pro - Manual (Page 247)

245 Chapter 16. Safety and warranty
with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on PP4TX-215.
Additional information on Specific Absorption Rates (SAR) can be found
on the Cellular Telecommunications Industry Association (CTIA) website
at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements.
SAFETY INFORMATION FOR BATTERY USAGE
•
Do not disassemble or open crush, bend or deform, puncture or
shred.
•
Do not modify or remanufacture, attempt to insert foreign objects
into the battery, immerse or expose to water or other liquids, expose
to fire, explosion or other hazard.
•
Only use the battery for the system for which it is specified.
•
Only use the battery with a charging system that has been qualified
with the system per this standard. Use of an unqualified battery
or charger may present a risk of fire, explosion, leakage, or other
hazard.
•
Do not short circuit a battery or allow metallic conductive objects to
contact battery terminals.
•
Replace the battery only with another battery that has been
qualified with the system per this standard, IEEE-Std-1725-2006.
Use of an unqualified battery may present a risk of fire, explosion,
leakage or other hazard.
•
Promptly dispose of used batteries in accordance with local
regulations.
•
Battery usage by children should be supervised.
•
Avoid dropping the phone or battery. If the phone or battery has
been dropped, specifically on the hard surface, and its damage
suspects, take it to the Customer Care Center for correct
inspections.
•
Improper battery use may result in a fire, explosion or other hazard.
SAR INFORMATION