Pantech Matrix Pro - Manual (Page 46)

44 Chapter 2. Basic operation
DELETE CHARACTERS
You can only delete characters when you are in input mode, either for
numbers, names, or text. The
[C] operates similarly to a backspace key
on a computer.
1
To backspace and delete a single character in any input mode, press
[C].
2
To backspace and delete an entire text or numeric field in any input
mode, press and hold the [C].
ENTER A SPACE
Either with Multipress or XT9 mode, press the [ #].
ENTER A SYMBOL
There may be times when you need to use a symbol that is not
displayed on the keypad. Additional symbols are available by accessing
a separate page.
1
Press and hold the [*].
2
In the menu that appears, press Symbols to display the Symbols
page.
3
Select the symbol you want.
4
Press [O].
ENTER NUMBERS IN TEXT BOXES
To enter numbers, use numeric mode. If you need to enter a number
within a line of text, change to numeric mode to enter the number, and
then change back to multipress or XT9 mode to finish entering the text.
1
Select the Numeric mode by pressing and holding the [*].
2
Enter the number or numbers using the keypad.
3
Select the XT9 mode by pressing and holding the [*], then finish
entering your text.
`
NOTE
If a field permits a numeric entry only, such as a phone number, the input
mode automatically defaults to numeric mode.
ENTERING TEXT AND NUMBERS