Panasonic DVD-H2000 - Manual (Page 40)

Reference
RQT5741
40
Product Service
1. Damage requiring service—The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged;
or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that de-
scribed in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthor-
ized substitutes may result in fire, electric shock, or other
hazards.
4. Safety check—After repairs or service, ask the servicer to per-
form safety checks to confirm that the unit is in proper working
condition.
Product information
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at
1-800-211-7262, or e-mail [email protected],
or web site (http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Cen-
tre at 1-800-561-5505, web site (www.panasonic.ca), or an au-
thorized Servicentre closest to you.
Maintenance
To clean this unit, wipe with a soft, dry cloth.
³Never use alcohol, paint thinner or benzine to clean this unit.
³Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Disc handling
Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)
DVD-RAM
³Clean DVD-RAM only with the DVD-RAM/PD disc cleaner availa-
ble as an optional accessory (part number LF-K200DCA1).
³Never use cloths or cleaners for CDs, etc.
º Condensation
Moisture may condense on discs after being brought inside from the
cold.
If the disc is a DVD-RAM, use the DVD-RAM/PD disc cleaner avail-
able as an optional accessory to wipe it dry.
With other discs, wipe with a soft, dry, lint-free cloth.
º Handling precautions
³Do not write on the label side with a ball-point pen or other writing
instrument.
³Do not use record cleaning sprays, benzine, thinner, static electric-
ity prevention liquids or any other solvent.
³Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
³Do not use scratch-proof protectors or covers.
³Do not use discs printed with label printers available on the
market.
º Do not place or store discs in the following
places
³Locations exposed to direct sunlight
³Humid or dusty locations
³Locations directly exposed to a heat vent or heating appliance
º How to hold a disc
Do not touch the recorded surface.
º If the surface is dirty
DVD-Audio, DVD-Video, Video CD, CD
Wipe it with a damp cloth and then wipe dry.