Panasonic PT-D7600U - Manual (Page 101)

101
PT-D7500U PT-D7600U
Interface ports
RGB2 input/RGB1 output terminal
Video input/output terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
1 set of high-density, D-sub 15p (female)
[For YP
B P R input]
Y: 1.0 V [p-p] synchronization signal included,
P
B P R : 0.7 V[p-p] 75
Ω
[For RGB input] 0.7 V[p-p] 75
Ω For G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
• However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.
(Active through for RGB1 output)
1 set BNC
Y 1.0 V[p-p] C 0.286 V[p-p] 75
Ω; Compliant with S1 signals
1 set Mini DIN 4p
Y 1.0 V[p-p] C 0.286 V[p-p] 75
Ω
D-sub 9-pin (female), RS-232C compliant
Used for personal computer control
1 set each for M3 pin jack
Wired remote control, used for link control
D-sub 9p (female)
Used for external control
Length of power supply cord 2.5 m (8.2")
Cabinet Molded resin
Outside dimensions Width: 530 mm (20.8"); Height : 200 mm (7.9"); Depth: 569 mm (22.4")
Mass 19.8 kg (44 lb) (without lens)
Working environment condition *1.Ambient temperature: 0 to 40°C for setting of lamp output at [LOW] and lamp
selection at [DUAL, LAMP 1, LAMP 2 or SINGLE]
0 to 35°C for setting of lamp output at [HIGH] and
lamp selection at [DUAL]
Ambient humidity: 20 to 80% (no condensation)
Remote control
Power source
Operation range
Mass
Outside dimensions 3 V DC (two AA dry cells)
approx. 7 m/23' (in front of beam receiver)
110 g (0.24 lb) (including dry cells)
Width: 50 mm (1.9"), Thickness: 31 mm (1.2"), Depth: 181 mm (7.1")
Option
Hanging attachment (For high ceiling) : ET-PKD75
Hanging attachment (For low ceiling)
: ET-PKD75S
Dual attachment : ET-DFD75
Carrying handle : ET-HAD75
Projection lens : ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4, ET-D75LE5,
ET-D75LE1SC, ET-D75LE2SC, ET-D75LE3SC, ET-D75LE4SC
DVI-D input module : ET-MD75DV
Network module : ET-MD75NT
Video signal input module : ET-MD95VM2
RGB signal input module : ET-MD95RGB
Serial digital input module (SD) : ET-MD95SD1
Serial digital input module (480p) : ET-MD95SD2
Serial digital input module (HD) : ET-MD95SD3
Lamp unit : ET-LAD7500 (single bulb), ET-LAD7500W (double bulbs)
Wireless mouse receiver : ET-RMRC1
*1.If the projector is used at high altitude (1 400 to 2 700 m), the value for allowable ambient temperature should be
lowered by 5°C.
Model No.