Panasonic PT-D7600U - Manual (Page 48)

48
Using the FREEZE function
Pressing the “FREEZE” button of the remote control switches between a still image and a motion image.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode
is available that allows the user to hide images temporarily.
Press the SHUTTER button of the remote control or the main unit.
The image is turned off.
Press the SHUTTER button again.
The image comes back.
A portion of the picture on the screen can be zoomed in on with “– D.ZOOM +” buttons of the remote control. It is
useful for highlighting a specific object during the presentation.
Press the “– D.ZOOM +” button of the
remote control.
The image is zoomed in.
Change the magnification with the “–
D.ZOOM +” button.
The magnification can be adjusted in 0.1 steps
over the range of 1.0 to 3.0 times.
Use buttons to move the
magnified image.
To restore the original image, press the
MENU button.
• The digital zoomed state cannot be stored in memory.
• If the input signal format is changed while in digital zoom mode, the projector will exit digital zoom
function.
Attention
Still image Motion image
A
B
C
D
E
ADJ
110
131
64
42
26
-5
122
106
76
47
18
368 368
-1
110%
81%
119%
112%
69%
100%
13%
21%
29%
32%
5%
E 18
122
106
76
47
D
C
B
A
A
B
C
D
E
ADJ
110
131
64
42
26
-5
122
106
76
47
18
368 368
-1
110%
81%
119%
112%
69%
100%
A
B
C
D
E
110
131
64
42
26
32%
2
Using the SHUTTER function
Using the digital zoom (– D.ZOOM +) function