Panasonic PT-D7600U - Manual (Page 88)

88
How to use network module (optional)
Network setting page
Select ON to enable the
DHCP client function.
Enter the IP address if
DHCP server is not used.
Enter the port number.
Normally use the value of
80 as indicated.
Enter the net mask if
DHCP server is not used.
Enter the gateway address
if DHCP server is not used.
Enter the projector name. Enter this field when the host name
is required such as when to use the DHCP server.
Projector control page
On-screen status is
displayed, even if the
on-screen of projector is
set to off.
This button updates the on-screen
description on the right of the control
page with the latest information.
Pressing these buttons controls the projector and
updates the on-screen description on the right of
the control page when control is finished.