Panasonic PT-D7600U - Manual (Page 14)

14
S-VIDEO IN terminal (pages 24 and 25)
An input terminal for S-video signals
(MIN4-pin DIN).
This terminal complies with S1 signals and
automatically toggles between 16:9 and 4:3
according to the size of input signals.
VIDEO IN terminal (page 25)
An input terminal for video signals. (BNC)
VIDEO OUT terminal (page 25)
An output terminal (active through) for video
signals. (BNC)
SERIAL IN terminal (pages 25–27, 78–80)
This terminal is an RS-232C/RS-422 compliant
input terminal (switching necessary) to connect a
PC and to externally control the main unit
(D-SUB 9-pin female).
SERIAL OUT terminal (pages 26, 27, 78–80)
This terminal is an RS-232C/RS-422 compliant
output terminal (switching necessary) to supply
signals given to the serial input terminal
(D-SUB 9-pin male).
RGB (YP B P R )1 input terminal (pages 26, 27)
A terminal to input RGB or YP B P R signals (BNC).
RGB (YP B P R )2 input/RGB (YP B P R )1 output
terminal (pages 26, 27)
This terminal (active through) receives RGB or
YP
B P R signals or supplies signals given to the
RGB1 input terminal (D-SUB 15-pin female).
REMOTE2 terminal (page 81)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
REMOTE1 lN/OUT terminal (page 17)
When two or more main units are used in the
system, they can be connected and controlled with
a wired remote control cable (M3 jack).
SERIAL
S-VIDEO RGB 2 IN / RGB 1 OUT VIDEO
REMOTE 1
RGB 1 IN
IN
IN
IN
OUT
OUT
OUT
SYNC/HD VD B/P B G/Y
REMOTE 2
R/P R
RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R)
IN
Side-mounted
connection terminals
Name and function of parts