Panasonic KX-TG5240AL - Manual (Page 12)

12
Installation
Connections
• USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using a telephone double adaptor.
• KX-TG5240AL is not designed to be used with rotary (pulse dialling) services.
* If the unit is connected to a telephone line with ADSL service, you may hear noise
from the receiver or speaker during conversations or the unit may not display
caller’s phone number properly. We recommend connecting a noise filter (contact
your ADSL service provider) to the telephone line between the base unit and the
telephone line jack.
Hook
Bottom of the base unit
Fasten the AC adaptor cord.
To Socket
AC Adaptor
To Power Outlet
(AC 230 V 240 V, 50 Hz)
Raise the antennas.
Telephone
Plug
Telephone
Line Cord
*Noise Filter
(For ADSL users)
TG5240AL.fm Page 12 Friday, June 11, 2004 5:22 PM