Panasonic KX-TG5240AL - Manual (Page 49)

Useful Info
rmation
Answering
System
Preparatio
n
49
T
e
lephone System
Intercom
Intercom calls can be made between a handset and the base unit, and between two
handsets (when the system has two or more handsets, p. 3). You can page all
handsets at once from the base unit, and announce the page to all handsets (Voice
Paging, p. 51).
Page the desired unit(s) by entering the extension number, shown in the top right of
each handset’s display. The base unit’s extension number is 0.
Making Intercom Calls
From
From
Using this feature, you can also locate a misplaced handset.
1 Press [HOLD/INTERCOM].
2 To page the base unit, press [0].
To page another handset, press its extension
number ([1] to [4]).
• The paged unit will ring for 1 minute.
• To stop paging, press [OFF].
3 When the paged party answers, start talking.
• You can switch to the speaker by pressing [s].
To switch back to the receiver, press [C].
4 To disconnect the intercom, press [OFF].
1 Press [LOCATOR/INTERCOM/TRANSFER].
• The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.
2 To page all handsets, press [0].
To page a specified handset, press its extension number [1] ( ) to [4] ( ).
• The handset(s) will ring for 1 minute.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER].
3 When the paged party answers, talk into the MIC.
4 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM/TRANSFER].
• The indicator lights go out.
Handset
Press extension#
to call
1-4=Handset
0=Base
Calling Base
Ex. Calling Base unit
Calling HS[2]
Ex. Calling Handset 2
Intercom
00-00-05
D 01
Ex. Intercom between
Handset 1 & Base unit
Base Unit
TG5240AL.fm Page 49 Friday, June 11, 2004 5:22 PM