7 missed calls, Remote operation, Listening to messages – Panasonic KX-TG5240AL User Manual

Page 68: Using the handset (remote operation), Handset

Advertising
background image

Listening to Messages

68

Using the Handset (Remote Operation)

If “

” flashes, there are new messages. If there are only old messages

” is displayed but will not flash.

If the Message Alert is turned on (p. 28), the Ringer/Message Alert indicator on

the handset will flash slowly when new messages have been recorded and the
handset is not in use.

To play back messages

If you do not select a mailbox in step 2, messages in Mailbox 1 will be played.

” will remain on the display after listening to messages.

You can switch to another mailbox by pressing [#] and the mailbox number ([1] to

[3]) during the remote operation.

If a call is received during playback, the unit rings and playback stops. To answer

the call, press [C] or [s]. For playback, start again from the beginning after
hanging up.

At the end of the last message, “End of final message” is heard. The unit will

announce the remaining recording time if it is less than 3 minutes.

If you hear “Memory full” after playback, erase unnecessary messages (p. 70).
When memo messages are played (p. 71), “MEMO” is displayed.
When the mailbox has no messages, the unit announces “Mailbox (No.)” and “No

messages”.

During playback, you can turn the Answering System on or off. To turn the system

on, press [8] during playback. To turn off, press [0].

1

Press the soft key (

)

.

A beep sounds and “Please select Mailbox” will be

heard from the speaker. To switch to the
receiver, press [

C

]. To switch back to the

speaker, press [s].

The icons for mailboxes that have new

messages will flash.

2

Press the soft key (

,

, or

).

If “Enter Mailbox password” is announced and

displayed, Mailbox 2 or 3 has a password. Enter
the password (p. 65).

“Mailbox (No.)” and the number of new

messages will be announced, and new
messages will be played.

When the mailbox has no new messages, the unit announces “Mailbox

(No.)” and “No new messages. All message playback”, and plays back all
messages in the mailbox.

To play all messages in the mailbox, press [5].
If you do not press any button, the voice menu will start (p. 69).

3

To end remote operation, press [OFF].

Handset

PLAY

PLAY

PLAY

7 missed calls

C I D

PLAY

C

Ex. New messages exist.

BOX 1

BOX 2

BOX 3

Remote operation

BOX 1

BOX 2

BOX 3

Ex. Mailbox 1 has new

messages.

PLAY

TG5240AL.fm Page 68 Friday, June 11, 2004 5:22 PM

Advertising