Panasonic KX-TG5240AL - Manual (Page 18)

Programmable Settings
18
Ringer Volume
You can set the handset and base unit ringer volumes to high, medium, low, or off.
The factory preset is HIGH. If the handset or base unit ringer is turned off, the
handset or base unit will ring at the low level for intercom calls, and will not ring for
outside calls. Caller names will not be announced even if the Talking Caller ID
feature is turned on (p. 36).
Handset ringer volume
• If the handset ringer is turned off, the handset displays “Ringer off” while not in
use.
• You can also adjust the ringer volume while an outside call is ringing. Press [d] or
[B] while the handset is ringing.
Temporary ringer off
While the handset is ringing for an outside call, you can turn the ringer off
temporarily by pressing [OFF]. The handset will ring again as normal the next time
a call is received.
1 Press [MENU].
2 Press the soft key ( ) at “Ringer
setting”.
3 Press the soft key ( ) at “Ringer
volume”.
4 Select the desired volume by pressing [d] or
[B].
• The volume will change and ring.
• The number of steps indicates the volume level.
• To turn the ringer off, press [d] repeatedly until
“Off ?” is displayed.
5 Press the soft key ( ).
Handset
SELECT Ringer setting
SELECT Ringer volume
Ringer volume
Low High
Ex. High
Ringer volume
Off ?
Ex. Off
SAVE
TG5240AL.fm Page 18 Friday, June 11, 2004 5:22 PM