Initial setting, Set answering, Set mailbox2&3 – Panasonic KX-TG5240AL User Manual
Page 65: Mailbox2 :22, Mailbox features, Setting the mailbox password
Useful Info
rmation
Answering
System
Preparatio
n
65
Mailbox Features
T
e
lephone System
Setting the Mailbox Password
(for Mailbox 2 and 3)
You can use Mailbox 2 or 3 as personal mailboxes. To prevent unauthorized people
from accessing your mailbox and listening to your messages, assign a
2-digit password (00–99) to Mailbox 2 or 3. Each password and the remote code
(p. 74) must be unique. Once a password is assigned to Mailbox 2 or 3, no one can
listen to messages without entering the password.
To confirm the password, repeat steps 1 to 5.
• The password is displayed. When finished, press [OFF].
To erase the password
Press the soft key (
) in step 6, press the soft key (
), and press
[OFF].
• You can access the mailbox without entering the password.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key (
).
3
Press the soft key (
) at “Set
answering”.
4
Scroll to “Set mailbox2&3” by pressing
[d] or [B], then press the soft key (
).
5
Select the mailbox by pressing [B] (Mailbox
2) or [d] (Mailbox 3).
6
Enter a 2-digit password (00–99).
• If you entered the wrong password, re-enter the
correct one.
7
Press the soft key (
).
• If the handset beeps 3 times, you entered the same password as the other
mailbox or the remote code (p. 74), or you entered a one-digit password.
Start again from step 6 and select another password.
8
Press [OFF].
Handset
SELECT
Initial setting
SELECT
Set answering
SELECT
Set mailbox2&3
Set password
^
=Mailbox2
V
=Mailbox3
Set password
Mailbox2 :22
Ex. Entered 22.
SAVE
CLEAR
SAVE
TG5240AL.fm Page 65 Friday, June 11, 2004 5:22 PM