Panasonic AJ-HDC27FP - Manual (Page 108)

108
BLACK SHADING screen
The black shading adjustments are performed on this
screen.
Item
Variable
range
Remarks
DETECTION ==
VF
display
ENG For execution of the digital
shading compensation.
CORRECT (DIG) ON
OFF ENG For setting the digital
shading compensation to
ON or OFF.
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens
FILM (CAM) MAIN MENU 4
WHITE SHADING screen
The white shading adjustments are performed on this
screen.
Item
Variable
range
Remarks
DETECTION
(V SAW) ==
VF
display
ENG For execution of the
analog shading
compensation.
CORRECT ON
OFF ENG For setting the shading
compensation to ON or
OFF.
FLARE screen
The camera’s flare settings are performed on this
screen.
Item
Variable
range
Remarks
R FLARE 0
:
100
VF
display
ENG For setting the R channel
flare; the preset value
differs from one camera to
another.
G FLARE 0
:
100
ENG For setting the G channel
flare; the preset value
differs from one camera to
another.
B FLARE 0
:
100
ENG For setting the B channel
flare; the preset value
differs from one camera to
another.
COLORIMETRY screen
The luminance signal standard is selected on this
screen.
Item
Variable
range
Remarks
MATRIX SMPTE-274
SMPTE-240
NTSC
VF
display
ENG For selecting the
luminance signal
standard.
INITIALIZE screen
The film or camera menu settings are initialized and
scene files are saved on this screen.
Item
Variable
range
Remarks
READ FACTORY
DATA ==
VF
display
ENG For restoring the film or
camera menu data
settings to the factory
settings.
WRITE USER
DATA == ENG For saving the user’s own
film or camera menu data
in the unit’s memory.
SCENE SEL 1
:
4
ENG For designating the
number of the scene file.
READ == ENG For loading the scene file
whose SCENE SEL was
designated.
WRITE == ENG For saving data in the
scene file whose SCENE
SEL was designated.
RESET == ENG For restoring the scene file
data settings to the factory
settings.
TITLE 1 == ENG For setting the title in
scene file No.1.
TITLE 2 == ENG For setting the title in
scene file No.2.
TITLE 3 == ENG For setting the title in
scene file No.3.
TITLE 4 == ENG For setting the title in
scene file No.4.
<Note>
When the frame frequency setting has been changed, it is
necessary to restart the unit by turning the POWER switch to OFF
and then to ON again for the setting to be switched.