Panasonic AJ-HDC27FP - Manual (Page 43)

43
Viewfinder screen status displays
B Battery type
This indicates the type of battery selected.
C Total tape length
This indicates the total length of the cassette tape.
D Preset color temperature display
This indicates the preset white balance value.
E VTR warning/information display
Alarm displays such as SLACK, REC WARNING,
HUMID, SERVO and RF as well as other warnings
are indicated here.
F Interval recording mode display (flashing)
G AUDIO CH1/CH2 input display
The input signals to be recorded in audio channels
1 and 2 are indicated here.
H Frame rate information display
This indicates the frame rate which has been set.
I lamp information display
This indicates the information when the lamp
has lighted.
J Frame frequency information display
This indicates the frame frequency (59.9 Hz or
60.00 Hz) which has been set.
K Operation mode display
This indicates the unit’s operation mode (F: FILM or
V: VIDEO) which has been set.
Selecting the display items
The items to be displayed on the viewfinder screen
can each be set to ON or OFF on the “VF
INDICATOR” screen of the FILM (CAM) MAIN MENU
2 or on the “VTR VF INDICATOR” screen of the VTR
MENU.
Selectable items
On the “VF INDICATOR” screen of FILM (CAM)
MENU
O
Extender display (EXTENDER)
O
Shutter speed/mode display (SHUTTER)
O Filter display (FILTER)
O
White balance memory display (WHITE)
O
Gain display (GAIN)
O Aperture value and super iris ON display (IRIS)
O Camera ID display (CAMERA ID)
O
Zoom position display (ZOOM LVL)
O
Color temperature display (COLOR TEMP)
O Frame rate display (FRAME RATE)
O
Gamma curve display (VERSION ID)
<Note>
The camera ID appears when color bar signals are
to be recorded in accordance with the
OUTPUT/AUTO KNEE switch setting.
For details, refer to “Setting the camera ID” (page
47).
n < VF INDICATOR >
EXTENDER :ON
SHUTTER :ON
FILTER :ON
WHITE :ON
GAIN :ON
IRIS :S+IRIS
CAMERA ID :ON
ZOOM LVL :OFF
COLOR TEMP :ON
FRAME RATE :ON
VERSION ID :ON