Panasonic AJ-HDC27FP - Manual (Page 67)

67
How to use the scene file
The contents of the setting menus can be saved in the
scene file area of the camera’s memory, and they can
be loaded from this area.
Four scene files are provided in the unit.
Use of this data speeds up the process of reproducing
suitable setup statuses.
Scene file operation
Menus are used to save the setting menu contents in
the scene file area of the camera’s memory and load
them from this area.
Saving the scene file
1
Perform the menu operations (pages 84 to 86),
and display the “INITIALIZE” screen of FILM
(CAM) MAIN MENU 4.
2
Turn the JOG dial button to move the arrow
(cursor) to the SCENE SEL item.
7
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The data settings are saved in the scene file area
of the camera’s memory.
8
After the data has been saved, press the MENU
button twice.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
n < INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
TITLE1:
TITLE2:
TITLE3:
TITLE4:
6
When the JOG dial button is pressed, the following
message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n NO
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
n SCENE SEL :1
READ
WRITE
RESET
TITLE1:
TITLE2:
TITLE3:
TITLE4:
3
When the JOG dial button is pressed, the scene
file number starts flashing. Turn the JOG dial
button to select the scene file in which data is to be
saved.
4
Press the JOG dial button to enter the scene file.
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :2
READ
n WRITE
RESET
TITLE1:
TITLE2:
TITLE3:
TITLE4:
5
Turn the JOG dial button to move the arrow
(cursor) to the WRITE item.