Panasonic AJ-HDC27FP - Manual (Page 86)

86
< ROP >
n MASTER PED : +000
MASTER DTL : +00
MASTER GAMMA : 0.45
R GAIN : +000
G GAIN : +000
B GAIN : +000
R PEDESTAL : +000
G PEDESTAL : +000
B PEDESTAL : +000
Menu operations
Operations common to the user menu and
engineer menu
Example:
Displaying sub-menus and deciding
on settings
Turn the JOG
dial button.
I
1
Turn the JOG dial button while the USER menu
screen or MAIN menu screen is displayed.
The cursor (
n ) moves to the SUB menu item.
2
Move the cursor ( n ) to the desired SUB menu
item, and press the JOG dial button.
The SUB menu is now displayed.
(The cursor appears in the title part of the SUB
menu.)
3
Turn the JOG dial button to move the cursor to the
desired item to be set, and press the JOG dial
button.
The digit whose value is to be set now flashes.
4
Turn the JOG dial button to change the setting.
n 2222 FILM MAIN MENU1 2222
ROP
MATRIX
COLOR CORRECTION1
COLOR CORRECTION2
LOW SETTING
MID SETTING
HIGH SETTING
ADITIONAL DTL1
ADITIONAL DTL2
SKIN TONE DTL
KNEE/LEVEL
GAMMA
CAMERA SETTING
Example:
Press the JOG
dial button.
I
n 2222 FILM MAIN MENU1 2222
n ROP
MATRIX
COLOR CORRECTION1
COLOR CORRECTION2
LOW SETTING
MID SETTING
HIGH SETTING
ADITIONAL DTL1
ADITIONAL DTL2
SKIN TONE DTL
KNEE/LEVEL
GAMMA
CAMERA SETTING
n < ROP >
MASTER PED : +000
MASTER DTL : +00
MASTER GAMMA : 0.45
R GAIN : +000
G GAIN : +000
B GAIN : +000
R PEDESTAL : +000
G PEDESTAL : +000
B PEDESTAL : +000
Example:
Press the JOG
dial button.
I
n < ROP >
MASTER PED : +008
MASTER DTL : +00
MASTER GAMMA : 0.45
R GAIN : +000
G GAIN : +000
B GAIN : +000
R PEDESTAL : +000
G PEDESTAL : +000
B PEDESTAL : +000
Example:
Press the JOG
dial button.
I
5
When the desired setting is reached, press the
JOG dial button.
The setting is now entered.
6
When other items are to be set, turn the JOG dial
button to move the cursor, and change and enter
the settings by repeating steps
3 to 5 .
7
To move to another SUB menu, turn the JOG dial
button to move the cursor to the title part of the
SUB menu, and press the JOG dial button.
The USER menu screen or MAIN menu screen is
now displayed so proceed with operation by
following the same steps.
8
Upon completion of the settings, press the MENU
button. The settings are now recorded, the setting
menu mode is exited, and the normal operation
mode is restored.
<Note>
To exit the camera unit’s menu, press the MENU
button twice. When the MENU button is pressed
once, operation is transferred to the VTR unit’s
menu.