Panasonic AJ-HDC27FP - Manual (Page 40)

40
Viewfinder lamp displays
Setting item Description of setting
GAIN (0 dB) Lamp display appears when the gain is
set to a value other than “0 dB.”
GAIN (–3 dB) Lamp display appears when the gain is
set to a value other than “–3 dB.”
SHUTTER Lamp display appears when the
SHUTTER switch is at ON.
WHITE PRESET Lamp display appears when “PRST”
applies to the channel in the white
balance memory.
EXTENDER Lamp display appears when the lens
extender is used.
FILTER Lamp display appears when the filter is
set to a value other than “3200 K.”
BLACK STR Lamp display appears when the black
stretch is at ON.
DAY LIGHT
(FILM MENU) Lamp display appears when the white
balance presetting is DAY LIGHT.
D5600K
(CAM MENU) Lamp display appears when the white
balance presetting is 5600 K.
Setting the lamp displays
Select the items targeted for the lamp display on
the “!LED” screen of the FILM (CAM) MAIN MENU 2
screen. (Under the factory settings, the “!LED” screen
is not displayed.)
To perform operations on the “!LED” screen, either
switch the unit to the engineer mode menu or select
the “!LED” screen on the FILM (CAM) USER MENU
SELECT 2 screen under the FILM (CAM) MAIN
MENU 4 screen.
<Note>
For details on selecting the engineer mode menu and
display screens, refer to “Menu operations” (pages 84
to 86).
1
Perform the menu operations (pages 84 to 86) to
open the “!LED” screen.
2
Turn the JOG dial button to move the arrow
(cursor) to the desired item.
4
Repeat steps 2 and 3 to set ON or OFF for the
other items.
3
For the selected item, press the JOG dial button,
and set whether or not the item is to be displayed
on the viewfinder screen.
Turn the JOG dial button, select display (ON) or no
display (OFF) and press the JOG dial button to
enter the selection.
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
n < !LED >
GAIN(0dB) :ON
GAIN(–3dB) :OFF
SHUTTER :ON
WHITE PRESET :OFF
EXTENDER :ON
FILTER :OFF
BLACK STR :OFF
DAY LIGHT :OFF
MATRIX :OFF
COLOR CORRECTION :OFF
FRAME RATE :ON
MATRIX Lamp display appears when the matrix is
at ON.
COLOR
CORRECTION Lamp display appears when the color
correction is at ON.
FRAME RATE Lamp display appears when the frame
rate has been set to 11 fps or below.