Panasonic AJ-HDC27FP - Manual (Page 35)

35
Audio input preparation
1
Attach the WX-RJ700 wireless receiver to the WX-
ZJ770 camera attachment.
2
Align the grooves in the camera attachment with
the pins on the battery case, etc. to attach the
wireless receiver.
3
Connect the AUDIO IN connectors on the camera
with the wireless receiver using the XLR cable.
4
Set the AUDIO IN switch or switches for the
channel or channels to which the XLR cable has
been connected to “REAR.”
5
Set the LINE/MIC/+48V selector switch on the rear
panel to “MIC.”
3
Set the LINE/MIC/+48V selector switch on the rear
panel to “LINE.”
When detaching the wireless receiver, push up
the lever on the bottom panel of the camera
attachment to disengage it.
<Note>
For details on the operations and other aspects of the
WX-RJ700 wireless receiver, refer to the operating
instructions which accompany the receiver.
Attach the WX-RJ700 wireless receiver when
Panasonic’s wireless system is to be used.
When using a wireless microphone
WX-RJ700 wireless
receiver
WX-ZJ770 camera
attachment
Audio output connectors
AUDIO IN
connectors
AUDIO IN
switches
XLR cable
1
Connect the AUDIO IN connectors on the camera
with the audio component using the XLR cable.
2
Set the AUDIO IN switch or switches for the
channel or channels to which the microphone or
microphones have been connected to “REAR.”
When connecting audio components
AUDIO IN
connectors
AUDIO IN switches
LINE/MIC/+48V
selector switch