Panasonic AJ-HDC27FP - Manual (Page 109)

109
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens
FILM (CAM) MAIN MENU 4
DIAGNOSTIC screen
The usage statuses and software versions are
displayed on this screen.
Item
Variable
range
Remarks
CAMSOFT (IN) ==
VF
display
ENG For displaying the version
of the software for the
built-in flash memory.
CAMSOFT (OUT) == ENG For displaying the version
of the software for the
external flash memory.
CAM TABLE == ENG For displaying the version
of the gamma table.
PLD (CAM) == ENG For displaying the version
of the software for the
camera system computer.
PLD (SHD) == ENG For displaying the version
of the software for the
shading.
SUB menu
VF
display
Remarks
S/N ENG Index for opening the S/N
measurement screen.
MODULATION ENG Index for opening the modulation
measurement screen.
RESOLUTION ENG Index for opening the resolution
measurement screen.
SENSITIVITY ENG Index for opening the sensitivity
measurement screen.
EVALUATION screen
The items which are measured for evaluation
purposes are set on this screen.
(S/N, MODULATION, RESOLUTION, SENSITIVITY)
<Note>
For details on how to release ENG SECURITY, consult your nearest
service center.
OPTION screen
The engineer menu display is selected on this screen.
Item
Variable
range
Remarks
ENG SECURITY ON
OFF
VF
display
ENG For selecting whether to
display the engineer
menu.
ON : The engineer menu
is not displayed.
OFF : The engineer menu
is displayed.
SHD, ABB SW
CRTL ON
OFF ENG For selecting whether to
automatically correct black
shading when the AUTO W/B
BAL switch is pressed
continuously for 8 seconds or
more on the ABB side.
ON : Black shading is
corrected automatically.
OFF : Black shading is not
corrected automatically.
AWB AREA 25%
50%
90% ENG For selecting the white
balance search area.
AWB & ABB
OFFSET ON
OFF ENG For setting how gain and
pedestal values, which are
set on the ROP screen of
FILM (CAM) MAIN MENU
1, are to be processed
after auto white balance
and auto black balance
are performed.
ON : Settings are added.
OFF : The values are reset
to zero.
CAM MENU SEL VIDEO MENU
FILM MENU ENG For setting the unit’s
operation mode.
VIDEO MENU:
The unit is set to the
video mode.
FILM MENU:
The unit is set to the film
mode.
SYSTEM FREQ. 59.94Hz
60.00Hz ENG For setting the unit’s frame
frequency.