Panasonic AJ-HDC27FP - Manual (Page 76)

76
6
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
When the data loading is completed, the following
message appears.
To load the VTR unit’s data, open the VTR CARD
READ/WRITE screen, and perform steps
4 to 6 .
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
READ OK
YES
n NO
TITLE : 22222222
Loading the data saved on the
card
Setup card operations
Select the file No.
Load the data of the selected file.
1
Perform the menu operations (pages 84 to 86),
and display the “CAM CARD READ/WRITE”
screen.
n < CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
2
Turn the JOG dial button to move the arrow
(cursor) to the SELECT item which comes avove
READ, and press the JOG dial button.
3
Turn the JOG dial button to select any number
from 1 to 8, and press the JOG dial button.
4
Turn the JOG dial button to move the arrow
(cursor) to the READ item.
< CAM CARD READ/WRITE >
SELECT :1
n READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
5
When the JOG dial button is pressed, the following
message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
READ ?
YES
n NO
< CAM CARD READ/WRITE >
n SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
If the data is given a title when it is saved, the title
will also be displayed.
<Note>
“F_” appears in front of a title which was set in
the film mode; “V_” appears in front of a title
which was set in the video mode. When the
data has been loaded, the unit is set to the
operation mode of the loaded data.