Panasonic AJ-HDC27FP - Manual (Page 75)

75
If one of the following messages appears when the JOG dial
button is pressed, the data cannot be saved.
14
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
Error message Remedial action
WRITE NG
NO CARD
(setup card has not been
inserted) Insert the card.
WRITE NG
FORMAT ERROR
(formatting error) The card was formatted by a
device other than the unit.
Replace the card.
WRITE NG
ERROR
(the data cannot be saved) The card may be defective.
Replace it.
13
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
When the data saving is completed, the
following message appears.
To save the VTR unit’s data, open the VTR CARD
READ/WRITE screen, and perform steps
11 to 13 .
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE OK
YES
n NO
TITLE : 22222222
12
When the JOG dial button is pressed, the
following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n NO
TITLE : 22222222
Saving the data settings to the selected file.
Setup card operations
10
When the JOG dial button is pressed, the arrow
(cursor) returns to the TITLE: item.
9
When the title has been input, turn the JOG dial
button to move the arrow (cursor) to the “:”
position.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
m
TITLE: 22222222
1: 5:
2: 6:
3: 7:
4: 8:
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
n TITLE: 22222222
1: 5:
2: 6:
3: 7:
4: 8:
11
Turn the JOG dial button to move the arrow
(cursor) to the WRITE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
n WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE: 22222222
1: 5:
2: 6:
3: 7:
4: 8: