Aaa messages – xml, Bill mirror, Dhcp – Proxim ORiNOCO AP-2500 User Manual

Page 128: Public space parameters, Aaa messages – xml bill mirror dhcp

Advertising
background image

128

Public Space Parameters

AAA Messages – XML

Bill Mirror

DHCP

Message

Meaning

USG_AAA: 4007 AAA_Interface added_by_administrator
00:50:04:29:37:56 Exp_time:24 hrs 0 min

User added

USG_AAA: 4800 AAA_XML Memory_updated__State_valid
00:50:04:29:37:56

Update Cache executed

USG_AAA: 4006 AAA_Interface
Removed_by_administrator a

User Delete issued for user a

Message

Meaning

RMTLOG: rmtlogXmlTcpSend: Connect error

Bill Mirror enabled, but the server does not respond

RMTLOG: rmtlogXmlTcpSend: transmission Ok

Bill Mirror enabled, and response received from server

Message

Meaning

DHCP: dhcpsStart: dst port (68) not DHCP server port

This indicates that there is another DHCP server on the
subscriber side of the AP.

DHCP: dhcpsStart: Invalid DHCP options packet

This means that the client sent an invalid DHCP cookie. If
this is seen, it could mean data errors in network or a
non-compliant DHCP client.

DHCP: dhcpsStart: invalid IP header

This could be caused by a non-compliant DHCP client or
data errors in the network.

DHCP: garbage_collect: dangling bind structure
bindptr->data = 0x3efdb14 cid = 0x000000000000 IP =
61.193.248.17 -- I

The AP code attempts to clean up DHCP bindings that have
been turned off and a subscriber in the subscriber table
appears with the same IP address.

DHCP: icmp_check: BAD... conflict: Req: MAC
00-00-0E-FE-87-09; In SubTable: IP 219.103.171.66 MAC
00-05-02-CB-58-23

This happens if the DHCP lease the AP wants to hand out
already exists in the Subscriber table. If it does, then the AP
will skip this lease and go on to the next one.

DHCP: turnoff_bind: binding passed is NULL!

This can happen if the code tries to turn off a resource
because there's someone on the subscriber side that is
already using that address. In this case, if the resource does
not have a corresponding binding, this syslog will result.

DHCP: Warning: DHCPDISCOVER - No available
addresses in the pool.

There are no more available leases in the DHCP server
lease pool and a DHCP request has been received.

WARNING DHCP: read_bind_db: can't find resource
usg13d733121 in nmhashtable

This occurs if the DHCP Lease pool settings have been
changed in the AP and the lease is not part of the new pool.

usgDHCPInit: server and relay are OFF

DHCP Services have been disabled on the AP.

Advertising