Installation & basic configuration – Proxim ORiNOCO AP-2500 User Manual
Page 27
Advertising
27
Installation & Basic Configuration
Figure 2-7
Slide a PC Card into the AP
NOTE
If you want to install a second 802.11b wireless card in Slot B, you will first need to remove the slot cover
(which is provided for plenum-rating purposes). See
for instructions. If you want to
install a 5 GHz kit, see
.
6. Attach one end of an Ethernet cable to the AP's Ethernet port and the other end to a network hub or switch.
7. Connect the unit’s power supply to a power source.
8. Wait for the power LED to turn green before proceeding.
Figure 2-8
Power LED turns green when the unit is operational
9. Determine the best location for your device.
Advertising