Proxim ORiNOCO AP-2500 - Manual (Page 184)

184
ORiNOCO AP-2500 User Guide
A
Using the Command Line Interface
In This Chapter
This section provides details for the Command Line (CLI) Interface used to manage an AP-2500 device. CLI
commands can be used to initialize, configure, and manage network operation of the Access Point.
•
CLI commands may be entered in real time through a keyboard, or submitted with CLI scripts.
• The CLI is available through both the Serial Port Interface and the Ethernet Interface.
NOTE
All CLI commands and parameters are case-sensitive.
• Prerequisite Skills and Knowledge
– Notation Conventions
– Important Terminology
– Navigation and Special Keys
– CLI Error Messages
• Command Line Interface (CLI) Variations
– Bootloader CLI
• CLI Command Types
– Operational CLI Commands
– Parameter Control Commands
• Using Tables & User Strings
– Working with Tables
– Using Strings
• Configuring the AP-2500 Unit using CLI commands
– Configuring Objects that Require Reboot
– “set” CLI Command
– “show” CLI Command
• Set Basic Configuration Parameters using CLI Commands
– Log Into the AP-2500 Unit using HyperTerminal
– Log Into the AP-2500 Unit using Telnet
– Set Basic Configuration Parameters using CLI Commands
• Other Network Settings
– Change your Wireless Interface Settings
– Set Interface Management Services
• Parameter Tables