Proxim ORiNOCO AP-2500 - Manual (Page 93)

93
Network Parameters
Acct-Request
– Username
– Called-Station-Id
– Calling-Station-Id
– Acct-Status-Type (Start/Stop/Alive)
– Acct-Session-ID
– Acct-Output-Octets
•
Number of octets (bytes) sent by subscriber.
– Acct-Input-Octets
•
Number of octets (bytes) received by subscriber.
– Acct-Output-Packets
•
Number of packets sent by subscriber.
– Acct-Input-Packets
•
Number of packets received by subscriber.
– Class
– Acct-Session-Time (Stop)
•
Acct-Session-Time is calculated the following way (for each transmitted/retransmitted Acct-Stop):
Acct-Session-Time = time of last sent packet - subscriber login time.
– Acct-Terminate-Cause (Stop)
•
1 = User Requested; 4 = Idle Timeout; 5 = Session Timeout
– NAS-IP
– NAS-Port-Type
– NAS-Port
– Framed-IP
– Acct-Delay-Time
– Nomadix Vendor Specific Attributes
The AP-2500 supports the following Vendor Specific Attributes from Nomadix, Inc.:
•
Nomadix-Bw-Up (integer)
• Nomadix-Bw-Down (integer)
• Nomadix-URL-Redirection (string)
• Nomadix-IP-Upsell (integer)
The AP-2500 will also wait for the receipt of an Accounting Reply message. If no reply is received, the AP will
retransmit the message based on the configuration of the
Retransmission Options .
Notes:
• NAS stands for Network Access Server. This refers to the AP-2500.
• Vendor Specific Attributes are also referred to as VSAs.