Proxim ORiNOCO AP-2500 - Manual (Page 26)

26
Installation & Basic Configuration
AP-2500 with Power Supply
Follow these installation steps if you purchased an AP with a power supply:
1. Clip the power supply into the mounting bracket.
2. Plug the AC power cord into the power supply.
Figure 2-5 Install the power supply
3. Slide the AP module onto the mounting bracket. Make sure it is properly seated.
4. Plug the DC connector from the power supply into the top of the AP module.
Figure 2-6 Insert module in mounting bracket and attach power connector
5. Slide an 802.11b wireless card (not included in the kit) into Slot A.