Proxim ORiNOCO AP-2500 - Manual (Page 211)

211
Using the Command Line Interface
Wireless 802.11a Parameters
NOTE
For 802.11a cards in Europe, Auto Channel Select is a read-only parameter; it is always enabled.
Name Type Values Access CLI Parameter
Wireless Interfaces Group N/A R wif
Network Name DisplayString 2 – 31 characters
My Wireless Network A
(default)
My Wireless Network B
(default) RW netname
Auto Channel Select (ACS) Integer enable (default)
disable RW autochannel
DTIM Period Integer 1 – 65535
(1 = default) RW dtimperiod
Operating Frequency Channel Integer 36 - 5.180 GHz
40 - 5.200 GHz
44 - 5.220 GHz
48 - 5.240 GHz
52 - 5.260 GHz (default
FCC)
56 - 5.280 GHz
60 - 5.300 GHz
64 - 5.320 GHz
Channels 36-64 are valid
for the FCC and ETSI
regulatory domains.
The following channels
are available in Japan:
34 - 5.170 GHz (default)
38 - 5.190 GHz
42 - 5.210 GHz
46 - 5.230 GHz
RW channel
RTS/CTS Medium Reservation Integer 0 – 2347
Default is 2347 (off) RW medres
MAC Address PhyAddress 12 hex digits R macaddr
Supported Data Rates Octet String See “Transmit Rate” R suppdatarates
Transmit Rate Integer32 Reported in 500 Kb/sec
intervals:
0 - Auto Fallback
(default)
12 (6 Mbit/sec)
18 (9 Mbits/sec)
24 (12 Mbits/sec)
36 (18 Mbits/sec)
48 (24 Mbits/sec)
72 (36 Mbits/sec)
96 (48 Mbits/sec)
108 (54 Mbits/sec) RW txrate
Supported Frequency Channels Octet String See Operating
Frequency Channel R suppchannels
Physical Layer Type Integer ofdm (orthogonal
frequency division
multiplexing) for 802.11a R phytype
Regulatory Domain List DisplayString USA (FCC)
Canada (DOC)
Europe (ETSI)
Spain (SP)
France (FR)
Japan (MKK) R regdomain