Proxim ORiNOCO AP-2500 - Manual (Page 29)

29
Installation & Basic Configuration
Figure 2-11 Remove the AP cover
4. Remove the power and Ethernet cables from the unit.
5. Position the antenna adapter, card inward, facing the top of the unit (see diagram) and insert the 5 GHz card into
the available card slot.
Figure 2-12 Insert card
6. Angle the antenna adapter slightly upwards, pinch the end tabs inwards and carefully slide the antenna adapter
onto the mounting bracket.
7. Gently push forward while rotating the antenna downwards and clip the adapter into the small cutouts on the face
of the mounting bracket.
Figure 2-13 Insert antenna