Public space parameters – Proxim ORiNOCO AP-2500 User Manual
Page 136
136
Public Space Parameters
12. Configure the ISP Logo Button settings.
•
Enter the Name or Title of the ISP Button in the ISP Logo Button’s Name/Text field.
— This is the text that will appear in the text bar at the bottom of the ICC when a subscriber rolls over the
icon with his/her mouse cursor.
•
In the Target URL field, enter the Web address to which a subscriber will be redirected upon clicking the ISP
Logo Button.
•
Enter the name of the ISP Logo button image file in the Image Name field.
— This name must match the logo file you downloaded to the AP in the images.zip file.
13. Configure the settings for Button 2 through Button 9, as necessary.
•
These buttons correspond to the lower row of buttons in the ICC.
•
Enter the Name or Title of the button in the appropriate Name/Text field.
— This is the text that will appear in the text bar at the bottom of the ICC when a subscriber rolls over the
icon with his/her mouse cursor.
•
In the Target URL field, enter the Web address to which a subscriber will be redirected upon clicking the
specified button.
•
Enter the name of the button image file in the Image Name field.
— This name must match the image file you downloaded to the AP in the images.zip file.
14. Click OK.
15. Click the Banner1 tab.
Figure 5-22 Assigning Banners Screen
16. Configure the settings for Banner 1.
•
Set the Banner Name.
— This is the text that will appear in the text bar at the bottom of the ICC when a subscriber rolls over the
icon with his/her mouse cursor.
•
In the Banner URL field, enter the Web address to which a subscriber will be redirected upon clicking the
banner.
•
Set the Banner Duration, in seconds (from 1 to 9999; 0 disables the banner).
— This is how long the banner will appear on the ICC before moving on to the next banner.
— The Web browser interface labels this parameter in Mins but it should be Seconds. By default, the
banners change every 6 seconds.