Panasonic AG-HPX300P - Manual (Page 119)

11
Chapter

Manipulating
Clips
with
Thumbnails
DIR ENTRY NG CARD:
The directory structure on the P2 card is not
supported.
For details on P2 card status indications, refer to [2. P2
Card Status (used memory capacity)]
SD memory card Status Display
The status display enables a confirmation of the SD
memory card formatted condition, available memory
capacity etc. From the thumbnail menu, select PROPERTY

DEVICES  SD CARD.
If the format is compatible with SD standards, the message
SD STANDARD : SUPPORTED
If the format is not compatible with SD standards, the
message
SD STANDARD : NOT SUPPORTED
is displayed. If this is the case, writing or reading will
not be successful. Format the card with the unit. For
more information on formatting SD memory cards, see
[Formatting SD memory cards] (page 115).
 NOTE
The indication of remaining capacity on an SD memory card
(PROXY REM) provides only a rough estimate of remaining
capacity and may differ from actual remaining capacity. SD and
SDHC cards with Speed Class Ratings may indicate recording
times that are significantly lower than actual capacity,
especially when used for recording a large number of short
video clips. The remaining capacity is displayed only when
proxy recording is set up to record on an SD memory card. For
details on setup procedures, refer to the User’s Guide of the
video encoder card (AJ-YAX800G, an optional accessory).
Video Encoder Card Status Display
(optional)
Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY  DEVICES  PROXY from the
thumbnail menu.
The slot in which the video encoder card is inserted, and
version information is displayed.