Panasonic AG-HPX300P - Manual (Page 138)

1
Chapter

Men
uOper
ations
DIAGNOSTIC screen
Item Setting Notes
VERSION Indicates the version of the firmware used in this
camera.
A subscreen provides details on which firmware
versions are used.
(Subscreen)
CAM SOFT: Camera microprocessor software
SYSCON SOFT: Software for system control
microprocessor
P2CS BL2-1: Boot program 1 for P2 control
microprocessor
P2CS BL2-2: Boot program 2 for P2 control
microprocessor
P2CS KR: P2 control microprocessor kernel
P2CS AP: P2 control microprocessor application
VUP: System software used for updating all camera
firmware
VUP FS: File system for updating the camera?
DM FPGA: Main FPGA configuration ROM
MODEL NAME Indicates the model name of this camera.
SERIAL NO. Indicates serial number of this camera.
OPERATION Indicates the time of the camera has been on.
OPTION MENU screen
Open this menu by holding down the DISP/MODE CHK button and when shooting status appears press the front MENU
button. Use this function to check connection status during nonlinear editing.
Item Setting Notes
1394 STATUS Opens the subscreen that shows 1394 status.
FORMAT:
Format of input or output signals
RATE: Transfer rate of input or output signals
60/50: Signal system of input or output signals
CH: Channel of input or output signals
SPEED: Transfer rate of input or output signals
STATUS: Status of signals output or input via the IEEE
1394 digital interface
VIDEO:
Status of input or output video signals
AUDIO: Status of input or output audio signals
1394 CONFIG Opens a menu for configuring 1394 functionality.
DFLT, 1-255
• Use DFLT for normal operation.
____ indicates the factory setting