Panasonic AG-HPX300P - Manual (Page 60)

0
Chapter

Adjustments
and
Settings
for
Recording
Framerate:0Pover0i(:)
02 00 01
Ao Ae Bo Be Co Ce
10 10 10
Time code digit
Video
Updated frame information
0Pmode
Framerate:Pover0P(:)
Updated frame
02 25 00 01 03 04 05 06 23 24 26 27 28 29
A A B B B C C C D D D D A A B B B C C D D D D D A A B B
01 10 10 10 01 00 10 10 01 00 10 01 01 00
Time code digit
Video
Updated frame information
Framerate:0Pover0P(:)
Time code digit
Video
Updated frame information
02 00 01
A A B B C C
10 10 10
Setting the Time Code
1
 SwitchthemenuoptionTCMODEonthe
RECORDINGSETUPscreentoDForNDF
usingthemenus.
For details on menu operation, refer to [Using the
menus] (page 120).
• Select DF to advance time code in drop frame
mode and NDF in non-drop frame mode. Note that
24P, 24PA and 24PN are always recorded in NDF
mode.
2
 UsetheCOUNTERbuttontoswitchtotime
codedisplay.
3
 PositiontheTCGswitchatSET.
4
 UsetheCURSORbuttonstosetthetimecode.
• Range of available time code settings:
00:00:00:00 to 23:59:59:29 (other than 24PN),
00:00:00:00 to 23:59:59:23 (24PN)
00 h 00 m 00 s 00
h min s frm
TC PRESET
SEL : PUSH /
+/- : PUSH
REC RUN
/
PRESET : PUSH SET
q button: Shifts the target (highlighted) digit to the
right.
w button: Shifts the target (highlighted) digit to the
left.
e button: Increases the highlighted number by one.
r button: Decreases the highlighted number by
one.
SET button: Use to confirm set time code value.
• Pressing the RESET button will reset any time
code setting to 0.
5
 PresstheSETbuttontoconfirmthetimecode
setting,andusetheTCGswitchtoselectatime
code.
• F-RUN steps the time code in free run mode, and
R-RUN set it in recording run mode.
 NOTE
• When 24P or 24PA is used, the time code is adjusted
every 5 frames. It is adjusted to multiples of four for
24PN and to even numbers for 720/30PN. The time
code cannot be set during recording.
• The set value is not valid if you change the TCG
switch position without pressing the SET button.
Time code function during battery
replacement
Even during battery replacement the backup mechanism
keeps the time code generator functioning.
 NOTE
When the POWER switch has been switched ON  OFF 
ON, the backup accuracy of the time code in free run mode is
about ±2 frames.