Panasonic AG-HPX300P - Manual (Page 52)


Chapter

Adjustments
and
Settings
for
Recording
Setting the Electronic Shutter
Setting the Shutter Mode and
Speed
1
 PresstheSHUTTERswitchpositionedatOFF
towardsON.
SHUTTERswitch
2
 PresstheSHUTTERswitchtowards[SEL].
Repeatthisswitchoveruntilthedesiredmode
orspeedappearsintheviewfinderscreen.
• If all modes and speeds are available, the display
changes in the following order:
For0iand0Precording
(1/15) (1/30) 1/60 1/100
1/250
S/S 1/120
1/500 1/1000 1/2000
For0Precording
(1/7.5) (1/15) 1/60 1/100
1/250
S/S 1/120
1/500 1/1000 1/2000
ForPrecording
(1/6) (1/12) 1/60 1/100
1/250
S/S 1/120
1/500 1/1000 1/2000
• The bracketed ( ) speeds cannot be selected
when VFR is ON.
 NOTE
• In any electronic shutter mode, a slower shutter speed will
reduce camera sensitivity.
• In auto iris mode, a faster shutter speed will increase the
aperture and lower the depth of field.
• During 1080i operation, speeds in brackets do not allow DRS
operation.
• Changes in synchro scan and shutter speed settings may
cause screen flicker.
Viewfinder displays relating to the shutter
See [Viewfinder Screen Status Displays] (page 65).
Placing the Camera-recorder in
SYNCHRO SCAN Mode
To place the camera-recorder in SYNCHRO SCAN mode,
follow the steps below.
1
 PresstheSHUTTERswitchpositionedatON
towardsSEL,toplacethecamera-recorderin
SYNCHROSCAN(S/S)mode.
SHUTTERswitch
SYNCHROSCANswitch
2
 InSYNCHROSCANmode,usetheSYNCHRO
SCANswitchtomakesteplesschangesinthe
rangebetween1/0.0sand1/.s(for0i
mode).
•HolddowntheSYNCHROSCANswitchtospeed
uptherateofshutterspeedchanges.
Ifshutterspeedchangesstopbeforethedesired
shutterspeedhasbeenreached,pressagainto
continuechangingshutterspeeds.
Range of variation in each mode
• 60P/60i mode: 1/60.0 to 1/249.8
• 30P/30PN mode: 1/30.0 to 1/249.8
• 24P/24PA/24PN mode: 1/24.0 to 1/249.8
• When the SYNC SCAN DISP option in DISPLAY SETUP is
set to DEG: 3.0d to 359.5d
SettingthemenuoptionSYNCSCANDISPintheDISPLAY
SETUPscreentodegprovidesaguidetosettingand
displayingshutterangle.