Panasonic AG-HPX300P - Manual (Page 134)

1
Chapter

Men
uOper
ations
Item Setting Notes
P2CARD REMAIN Determines how remaining P2 card capacity is
displayed.
TOTAL:
Displays value for both cards.
ONE-CARD: Indicates the remaining capacity of the
card that is being recorded.
OTHER DISPLAY Sets display of other data.
PARTIAL:
Displays some of the data.
ALL: Displays all data.
OFF: Not displayed
MENU BACK Select whether to lower the transparency of the
background to make menu text easier to read.
ON:
Lowers background transparency. (However, the
transparency of LCD SETTING and EVF SETTING is
not lowered.)
OFF:
Does not lower background transparency.
REC COUNTER Selects counter operation during recording.
TOTAL:
Provides a continuous count until reset by
pressing the COUNTER_RESET button.
CLIP:
Clears the count value at start of recording and
counts time of recording.
BATTERY SETUP screen
Item Setting Notes
EXT DC IN SEL Selects external DC power supply type.
AC ADAPTER:
AC adapter
BATTERY: Battery
BATTERY SELECT Sets the battery type.
PROPAC14, TRIMPAC14, HYTRON50, HYTRON140,
DIONIC90, DIONIC160, NP-L7, ENDURA7,
ENDURA10, ENDURA-D, PAG L95, BP-GL65/95,
NiCd14, TYPE A, TYPE B
BATTERY MODE Sets near end.
AUTO:
Automatically selects one of the battery types
selected in BATTERY SELECT.
MANUAL:
Manually sets the near end voltage.
PROPAC14 NEAR Sets the near end voltage for PROPAC14. (Adjustable
in 0.1 V units.)
11.0 V ... 13.5 V ... 15.0 V
TRIMPAC14 NEAR Sets the near end voltage for PROPAC14. (Adjustable
in 0.1 V units.)
11.0 V ... 13.4 V ... 15.0 V
HYTRON50 NEAR Sets the near end voltage for HYTRON50. (Adjustable
in 0.1 V units.)
11.0 V ... 13.4 V ... 15.0 V
HYTRON140 NEAR Sets the near end voltage for HYTRON140.
(Adjustable in 0.1 V units.)
11.0 V ... 13.1 V ... 15.0 V
DIONIC90 NEAR Sets the near end voltage for DIONIC90. (Adjustable
in 0.1 V units.)
11.0 V ... 13.7 V ... 15.0 V
DIONIC160 NEAR Sets the near end voltage for DIONIC160. (Adjustable
in 0.1 V units.)
11.0 V ... 13.3 V ... 15.0 V
NP-L7 NEAR Sets the near end voltage for NP-L7. (Adjustable in 0.1
V units.)
11.0 V ... 13.6 V ... 15.0 V
____ indicates the factory setting