Panasonic AG-HPX300P - Manual (Page 20)

0
Chapter

P
ar
ts
and
their
Functions
30 29 32
12 31 18 19
28 23 21
22 26 27
24
25 20
13
17 15 16 14
 Shooting and Recording/Playback
Function Section (Recorder Unit)
12 REC button
Press this button to start recording and press once
again to stop it.
This button operates in the same way as the VTR button
on the lens.
13 SDI OUT CHARACTER switch
Use this switch to control the superimposition of
character data onto SDI OUT to indicate status or
setting menus.
ON:
Superimposes characters.
OFF: Does not superimpose characters.
 NOTE
In addition to SDI OUT, a setting menu allows you to
superimpose characters on VIDEO OUT video.
14 t REW (rewind) button
In stop mode, press this button for fast-reverse
playback.
During playback, press this button for fast-reverse
playback at about 4x normal speed.
If this button is pressed when playback is paused, the
beginning of the clip being played is located in pause
mode (cue-up mode).
15 y FF (fast forward) button
In stop mode, press this button for fast playback.
During playback, press this button for fast playback at
about 4x normal speed.
If this button is pressed when playback is paused, the
beginning of the next clip is located in pause mode
(cue-up mode).
16 g STOP button
Press this button to stop playback.
Press this button to stop interval recording and one-shot
recording.
17 PLAY/PAUSE button
Press this button to view playback in the viewfinder or
on a color video monitor.
Press it during playback to pause playback.
18 USB 2.0 connector (DEVICE)
19 USB 2.0 connector (HOST)
Connect a USB 2.0 cable to this connector.
To enable transfer of data via USB 2.0, set the menu
option PC MODE in the SYSTEM SETUP screen to ON.
This setting restricts recording, playback and clip
operations with the camera. For details, refer to
page 140.